FRONT DOOR SPEAKER INSTALLATION

  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    1. Engage the 2 claws to the vehicle body to temporarily install the front No. 1 speaker assembly.

    2. Install the front No. 1 speaker assembly with the 4 screws.

      A011S2KE01
      *A LH Side
      *B RH Side

      Note

      Do not touch the speaker cone.

      Tech Tips

      Install the screws in the order shown in the illustration.

    3. Connect the connector.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

    1. Install the front door inner glass weatherstrip.

      A011TAM

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

      A011TQME01
      Text in Illustration
      *1 Front Door Inside Locking Cable Assembly
      *2 Front Door Lock Remote Control Cable Assembly

    2. Engage the front door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

      A011SQHE01
      Text in Illustration
      *1 Reference Boss

    3. Engage the 10 clips and install to front door trim board sub-assembly.

      A011RIN

    4. Install the 3 screws.

    5. If protective tape has been applied, remove it.

  4. INSTALL COURTESY LIGHT ASSEMBLY

    1. Connect the connector.

    2. Engage the claw to install the courtesy light assembly.

      A011TI7E01
      Text in Illustration
      *A for LH Side
      *B for RH Side

  5. INSTALL FRONT ARMREST ASSEMBLY

    1. Engage the 2 guides, 3 clips and 7 claws, and install the front armrest assembly.

      A011SU2

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    1. Connect each connector.

    2. Engage the 4 guides, 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.

      A011QZ8

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    1. Connect each connector.

    2. Engage the 4 guides, 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.

      A011UWR

  8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    1. Engage the 3 clips to install the front door lower frame bracket garnish.

      A011SPW

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    1. Engage the 3 claws to install the front door inside handle bezel plug.

      A011RPH