AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System) The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CELLULAR PHONE

   1. Check if the other caller can hear your voice properly.

      OK
      Your voice can be heard properly.

      Tech Tips

      The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.

   NG

   REPLACE CELLULAR PHONE

   OK

2. CHECK SETTINGS

   1. Display the "Call" screen.

      

   2. Check that the "Mute" switch is not set to on.

      OK
      "Mute" switch is not set to on.

      Text in Illustration

      *a

      Example

   NG

   TURN "Mute" SWITCH OFF

   OK

3. CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

   1. Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check Click here.

      

   2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

   3. Push the recording switch and perform voice recording (w/ Voice Switch of Steering Pad Switch Assembly).

      Tech Tips

      • Voice can be recorded for up to 5 seconds.

      • Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

   4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion (w/ Voice Switch of Steering Pad Switch Assembly).

      OK
      All check results are normal.

   NG

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

   OK

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here