AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System) CD Sound Skips

INSPECTION PROCEDURE

Note

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

PROCEDURE

  1. CHECK CD

    1. Check that the CD is not deformed or cracked.

      A011STJ
      OK
      No deformation or cracks on the CD
    NG

    CD IS FAULTY

    OK

  2. CHECK CD

    1. Check the CD.

      A011SHW
      OK
      The CD is clean.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Tech Tips

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NG

    CLEAN CD

    OK

  3. REPLACE CD AND RECHECK

    1. Replace the CD with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.
    NG

    CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

    OK

    CD WAS FAULTY

  4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

    1. Check the radio and display receiver assembly installation condition.

      1. Check that the radio and display receiver assembly is properly installed.

        OK
        The radio and display receiver assembly is properly installed.
    NG

    REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here