AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System) Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

INSPECTION PROCEDURE

Note

  • Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.

  • After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.

PROCEDURE

  1. CHECK SATELLITE RADIO

    1. Check radio condition.

      Result
      Result Proceed to
      Broadcast cannot be selected A
      Broadcast can be selected, but selection can not be memorized B
    B

    CHECK SATELLITE RADIO Click here

    A

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

  2. CHECK SATELLITE RADIO

    1. Check the number of preset channels.

      OK
      36 channels have already been preset.
    NG

    CHECK BATTERY Click here

    OK

    END (ONLY 36 CHANNELS CAN BE PRESET)

  3. CHECK BATTERY

    1. Check if the battery was replaced.

      OK
      Battery was not replaced.
    NG

    ADD PRESET CHANNEL INTO MEMORY AGAIN Click here

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

  4. ADD PRESET CHANNEL INTO MEMORY AGAIN

    1. Check if the preset channels that have been cleared can be added into memory again.

      OK
      Preset channels can be added into memory.
    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    END