PARKING BRAKE ASSEMBLY DISASSEMBLY

Tech Tips

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

  1. REMOVE REAR WHEEL

  2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

    1. Remove the bolt and separate the rear flexible hose from the rear shock absorber.

      A011TCP

    2. Remove the 2 bolts, and separate the rear disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the rear disc brake caliper from hanging down by the flexible hose.

  3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

  4. REMOVE REAR DISC

    1. Put matchmarks on the rear disc and the rear axle hub.

      A011RDLE01
      Text in Illustration
      *a Matchmark

    2. Release the parking brake and remove the rear disc.

      A011U0C

      Tech Tips

      If the disc cannot be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.

  5. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Front Side)

    1. Remove the parking brake shoe return tension spring.

      A011TOM

  6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Rear Side)

    1. Remove the parking brake shoe return tension spring.

      A011TOS

  7. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Front Side)

    1. Using SST, remove the parking brake shoe hold down compression spring.

      A011SVTE01
      SST
      09718-00011

  8. REMOVE PARKING BRAKE SHOE STRUT

    1. Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand as shown in the illustration.

      A011U03

    2. Remove the parking brake shoe strut.

      A011SER

  9. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Rear Side)

    1. Using SST, remove the parking brake shoe hold down compression spring.

      A011REBE01
      SST
      09718-00011

  10. SEPARATE PARKING BRAKE SHOE LEVER

    1. Expand the No. 1 and No. 2 parking brake shoe assemblies outward by hand and pull downward to separate them from the parking brake plate.

      A011UPK

    2. Separate the parking brake shoe lever from the No. 2 parking brake shoe assembly.

  11. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET

    1. Remove the parking brake shoe adjusting screw set.

      A011SWL

  12. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY

    1. Remove the No. 1 parking brake shoe assembly.

      A011R22

  13. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side)

    1. Remove the parking brake shoe return tension spring.

      A011SCJ

  14. REMOVE PARKING BRAKE SHOE LEVER

    1. Using needle-nose pliers, remove the parking brake shoe lever from the No. 3 parking brake cable assembly as shown in the illustration.

      A011UDL

  15. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN

    1. Remove the parking brake shoe hold down spring pin (for front side).

      A011R6X

    2. Remove the parking brake shoe hold down spring pin (for rear side).

      A011VAH