FREEZE FRAME DATA
Note
Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even if the values are within specifications.
Turn the ignition switch to ON and park the vehicle on level ground. Check the freeze frame data by using the Techstream.
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Check the freeze frame data on the Techstream.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Meter Vehicle Velocity | Vehicle speed from meter/ Min.: 0.0 km/h (0.0mph) Max.: 300.0 km/h (186.4 mph) |
0 km/h (0 mph) | Engine running and vehicle stopped |
| No significant fluctuation | Engine running and vehicle driven at constant speed | ||
| Engine Revolution | Engine speed/ Min.: 0 rpm Max.: 12800 rpm |
No significant fluctuation | Engine running at a constant speed |
| Motor Actual Current | Current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort -The value increases when turning right and decreases when turning left |
Engine running and steering wheel being turned |
| Command Value Current | Requested current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort -The value increases when turning right and decreases when turning left |
Engine running and steering wheel being turned |
| Thermistor Temperature | ECU substrate temperature/ Min.: -50.0°C (-58.0°F) Max.: 150.0°C (302.0°F) |
-50 to 150°C (-58 to 302°F) | - |
| PIG Power Supply | Power source voltage to activate motor/ Min.: 0.0000 V Max.: 20.1531 V |
9 to 16 V | Always |
| IG Power Supply | ECU power source voltage/ Min.: 0.0000 V Max.: 20.1531 V |
9 to 16 V | Ignition switch ON |
| Steering Wheel Torque | Steering wheel torque/ Min.: -327.68 Nm Max.: 7.00 Nm |
Value changes in proportion to steering effort -The value increases when turning left and decreases when turning right |
Engine running and steering wheel being turned |
| Torque Sensor 1 Output | Torque sensor 1 output value/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| 2.5 to 3.8 V | Engine running and steering wheel being turned to right with vehicle stopped | ||
| 1.2 to 2.5 V | Engine running and steering wheel being turned to left with vehicle stopped | ||
| Torque Sensor 2 Output | Torque sensor 2 output value/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| 1.2 to 2.5 V | Engine running and steering wheel being turned to right with vehicle stopped | ||
| 2.5 to 3.8 V | Engine running and steering wheel being turned to left with vehicle stopped | ||
| TRQ1 Zero Point Value | Zero point value of torque sensor 1/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| TRQ2 Zero Point Value | Zero point value of torque sensor 2/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| Motor Terminal Volt(+) | Motor terminal M1 voltage/ Min.: 0.0 V Max.: 25.5 V |
9 to 16 V | Engine running and steering wheel being turned to right |
| Below 1 V | Engine running and steering wheel being turned to left | ||
| Motor Terminal Volt(-) | Motor terminal M2 voltage/ Min.: 0.0 V Max.: 25.5 V |
Below 1 V | Engine running and steering wheel being turned to right |
| 9 to 16 V | Engine running and steering wheel being turned to left |