BRAKE PEDAL REMOVAL

  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)

    1. Disconnect the connector.

      A011RL6E01

    2. Disengage the clamp.

      Text in Illustration
      *1 Clamp
      *2 Guide

    3. Remove the bolt.

    4. Disengage the 2 guides and remove the headlight leveling ECU assembly.

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY

    1. Disconnect the connector.

      A011TTU

    2. Turn the stop light switch assembly counterclockwise and remove it.

      A011UHO

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN

    1. Remove the clip and push rod pin.

      A011TJ7

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL RETURN SPRING

    1. Remove the brake pedal return spring from the brake pedal support assembly.

      A011S9E

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

    1. Disconnect the brake pedal load sensing switch connector and disengage the clamp.

      A011UQQ

    2. Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

      A011R50

    3. Remove the 4 nuts and brake pedal support assembly.

      A011TNJ