VSC OFF SWITCH REMOVAL

  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    1. Disconnect the front door opening trim weatherstrip LH.

      A011QQ1

  4. REMOVE INSTRUMENT SIDE PANEL LH

    1. Using a moulding remover, disengage the 4 claws as shown in the illustration.

      A011RS3

    2. Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

      A011TVI

  5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    1. Disengage the 3 clips to remove the No. 1 instrument cluster finish panel garnish as shown in the illustration.

      A011QO5

  6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    1. Apply protective tape to the area shown in the illustration.

      A011RHGE01
      Text in Illustration
      *1 Protective Tape

    2. Disengage the 2 clips as shown in the illustration.

      A011RH9

    3. Using a moulding remover, disengage the 2 clips to remove the No. 1 instrument panel register assembly.

      A011S1A

  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    1. Operate the tilt and telescopic lever to fully extend and lower the steering column assembly.

    2. Using a moulding remover, disengage the 2 claws, 4 clips and 2 guides.

      A011VC0

    3. Disengage the 5 claws, 5 clips and 2 guides.

      A011RQU

    4. Disconnect each connector.

    5. Remove the instrument cluster finish panel assembly as shown in the illustration.

      A011V6T

  8. REMOVE VSC OFF SWITCH

    1. Disengage the 2 claws and remove the VSC OFF switch from the instrument cluster finish panel assembly.

      A011UZZ