REAR LOWER ARM REMOVAL

Tech Tips

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • The rear No. 2 suspension arm assembly can be removed directly from the vehicle.

  1. REMOVE REAR WHEELS

  2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor)

    Click here

  3. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY

    1. Remove the bolt and nut, and separate the rear No. 2 suspension arm assembly (outer side) from the rear axle carrier sub-assembly.

      A011RIV

      Note

      When removing the bolt, keep the nut from rotating.

  4. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY

    1. Remove the bolt and rear No. 2 suspension arm assembly from the rear suspension member sub-assembly.

      A011TTB

  5. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  6. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY

    1. Remove the bolt and rear No. 1 suspension arm assembly from the rear suspension member sub-assembly.

      A011TMR