PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    1. Remove the transmission control shaft lever.

      Tech Tips

      Click here

    2. Loosen the 2 bolts of the park/neutral position switch assembly.

      A011SUO

    3. Align the protrusions of the park/neutral position switch assembly.

      A011V9DE10
      Text in Illustration
      *a Protrusion

    4. Hold the park/neutral position switch assembly in position and tighten the 2 bolts.

      A011SUO
      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      After installing the park/neutral position switch assembly, confirm that the 2 protrusions on the switch are aligned.

    5. Install the transmission control shaft lever.

      Tech Tips

      Click here

    6. After the adjustment, perform the switch operation check Click here.