PARK / NEUTRAL POSITION SWITCH INSPECTION

  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    1. Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

      A011RBTE03
      Standard Resistance
      Tester Connection Shift Lever Position Specified Condition
      4 (B) - 9 (L) P or N Below 1 Ω
      Except P and N 10 kΩ or higher
      1 (RB) - 3 (PL) P Below 1 Ω
      Except P 10 kΩ or higher
      1 (RB) - 8 (NL) N Below 1 Ω
      Except N 10 kΩ or higher
      1 (RB) - 2 (RL) R Below 1 Ω
      Except R 10 kΩ or higher
      1 (RB) - 7 (DL) D, S, "+" or "-" Below 1 Ω
      Except D, S, "+" and "-" 10 kΩ or higher
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch Assembly)

      If the result is not as specified, replace the park/neutral position switch assembly.