VALVE BODY ASSEMBLY REMOVAL

REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

Click here

REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

1. Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the transaxle case sub-assembly.

   

   Note

   Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts, and carefully remove the automatic transaxle oil pan sub-assembly.

REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET

1. Remove the automatic transaxle oil pan gasket.

REMOVE TRANSMISSION OIL CLEANER MAGNET

1. Remove the 2 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.

   

   Text in Illustration

   *1	Transmission Oil Cleaner Magnet

2. Examine particles in the automatic transaxle oil pan sub-assembly.

   

   1. Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle assembly.

      Result

      Steel (magnetic)	Brass (non-magnetic)
      Bearing, gear and plate wear	Bushing wear

REMOVE VALVE BODY OIL STRAINER ASSEMBLY

1. Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.

   

2. Remove the O-ring from the valve body oil strainer assembly.

   

REMOVE TRANSMISSION VALVE BODY ASSEMBLY

1. Remove the 11 bolts and transmission valve body assembly from the transaxle case sub-assembly.

   

   Note

   When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case sub-assembly to interfere with each other.

REMOVE NO. 1 GOVERNOR APPLY GASKET

1. Remove the 2 No. 1 governor apply gaskets from the transaxle case sub-assembly.

   

REMOVE MANUAL VALVE

1. Remove the manual valve from the transmission valve body assembly.