FRONT DRIVE SHAFT ASSEMBLY (for 2GR) INSPECTION

  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

    1. Check that there is no excessive play in the radial direction of the outboard joint.

      A011U1V

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. Check whether the drive shaft dimensions (A) are within the following specifications.

      A011QTTE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A)
      Dimension (A)
      LH Side 587.5 mm (1.93 ft.)
      RH Side 906.4 mm (2.97 ft.)