IGNITION SWITCH INSPECTION

  1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY

    1. Measure the switch resistance.

      A011SNYE02
      Text in Illustration
      *a

      Component without harness connected

      (Ignition or Starter Switch Assembly)
      *b LOCK
      *c ACC
      *d ON
      *e START
      Standard Resistance
      Tester Connection Switch Position Specified Condition
      Between all terminals LOCK 10 kΩ or higher
      2 (ACC) - 4 (AM1) ACC Below 1 Ω
      2 (ACC) - 4 (AM1) ON
      1 (IG1) - 4 (AM1)
      5 (AM2) - 6 (IG2)
      3 (ST1) - 4 (AM1) START
      1 (IG1) - 4 (AM1)
      5 (AM2) - 6 (IG2)
      5 (AM2) - 7 (ST2)

      If the result is not as specified, replace the ignition or starter switch assembly.