IGNITION SWITCH REMOVAL

  1. REMOVE STEERING COLUMN ASSEMBLY

    Click here.

  2. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY

    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in each tapered-head bolt.

    3. Using a screw extractor, remove each tapered-head bolt, and then remove the steering column upper with switch bracket assembly from the steering column assembly.

      A011V15

  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

    1. Disengage the 2 claws and remove the ignition or starter switch assembly.

      A011TCY