INTAKE AIR CONTROL VALVE (for Intake Air Control System) ON-VEHICLE INSPECTION

  1. INSPECT INTAKE AIR CONTROL VALVE (for Intake Air Control System)

    1. Remove the inlet No. 2 air cleaner Click here.

    2. Using a vacuum pump, apply 27 kPa (200 mmHg, 7.88 in.Hg) or higher of vacuum to the diaphragm chamber and check that the valve moves.

      A011TDH

    3. Wait 1 minute and check that the needle of the vacuum pump does not lower.

      If the operation is not as specified, replace the air cleaner case sub-assembly.

    4. Install the inlet No. 2 air cleaner Click here.