RADIATOR REMOVAL

  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

    1. Loosen the radiator drain cock plug.

    2. Remove the radiator cap sub-assembly.

      A011QSBE01
      Text in Illustration
      *1 Radiator Cap Sub-assembly *2 Radiator Drain Cock Plug

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  5. REMOVE ENGINE UNDER COVER RH

  6. REMOVE ENGINE UNDER COVER LH

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE COOL AIR INTAKE DUCT SEAL

    1. Remove the 7 clips and cool air intake duct seal.

      A011RCO

  9. REMOVE INLET AIR CLEANER ASSEMBLY

    1. Remove the 2 bolts and inlet air cleaner assembly.

      A011SRR

  10. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

    1. Put protective tape around the radiator grille sub-assembly.

      A011R4XE01
      Text in Illustration
      *1 Protective Tape

    2. Remove the 3 clips.

    3. Disengage the 8 claws, and remove the radiator grille sub-assembly.

      A011V5CE01
      Text in Illustration
      *A for Standard *B for Sport Package

  11. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    1. Disconnect the radiator reserve tank hose.

      A011UUQ

    2. Remove the 2 bolts and radiator reserve tank assembly.

  12. DISCONNECT NO. 1 RADIATOR HOSE

    1. Disconnect the No. 1 radiator hose.

      A011URG

  13. DISCONNECT NO. 2 RADIATOR HOSE

    1. Disconnect the No. 2 radiator hose and clamp.

      A011V1U

  14. REMOVE HOOD LOCK ASSEMBLY

    1. w/ Engine Hood Courtesy Switch:

      1. Disconnect the connector.

        A011R8X

    2. Remove the 3 bolts.

      A011V6F

    3. Disconnect the hood lock control cable assembly and remove the hood lock assembly.

      A011S8A

  15. REMOVE UPPER RADIATOR SUPPORT

    1. Disconnect the 2 connectors.

      A011R7W

    2. Disconnect the hood lock control cable clamp and remove the 5 bolts and upper radiator support.

      A011SMC

    3. Remove the 2 radiator support cushions.

  16. REMOVE RADIATOR ASSEMBLY

    1. Disconnect the 2 clamps and 2 connectors.

      A011UOX

    2. Remove the 4 bolts and separate the condenser assembly from the radiator assembly.

      A011T69

    3. Remove the radiator assembly with fan assembly.

      A011SL5

      Note

      Do not apply any excessive force to the cooler condenser assembly or pipe when removing the radiator assembly.

    4. Remove the 2 lower radiator supports.

    5. Release the 3 claws and lift the fan assembly from the radiator.

      A011UYI