REAR CRANKSHAFT OIL SEAL REMOVAL

  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    1. Using SST, hold the crankshaft pulley.

      A011TDEE01
      SST
      09213-70011   ( 09213-70020 )
      09330-00021

    2. Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.

      A011QSI

  3. REMOVE ENGINE REAR OIL SEAL

    1. Using a knife, cut off the engine rear oil seal lip.

      A011RGUE11
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

    2. Using a screwdriver, pry out the engine rear oil seal.

      Note

      Be careful not to damage the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.