FRONT CRANKSHAFT OIL SEAL REMOVAL

  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT

    1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

      A011QOJ

    2. While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to fix the V-ribbed belt tensioner.

  6. REMOVE CRANKSHAFT PULLEY

    1. Using SST, loosen the crankshaft pulley bolt.

      A011SYME03
      SST
      09213-70011   ( 09213-70020 )
      09330-00021
      Text in Illustration
      *a Hold
      A011T1X Turn

    2. Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      A011UNGE01
      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )
      Text in Illustration
      *a Hold
      A011T1X Turn

    3. Remove the pulley set key from the crankshaft.

      A011RDQ

  7. REMOVE TIMING CHAIN CASE OIL SEAL

    1. Using a knife, cut off the timing chain case oil seal lip.

      A011TUDE04
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.