CYLINDER HEAD DISASSEMBLY

  1. REMOVE INTAKE VALVE

    1. Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

      A011TOUE01
      SST
      09202-70020   ( 09202-00010 )

    2. Remove the retainer, compression spring and valve.

      Tech Tips

      Arrange the removed parts in the correct order.

  2. REMOVE EXHAUST VALVE

    1. Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

      A011R67E01
      SST
      09202-70020   ( 09202-00010 )

    2. Remove the retainer, compression spring and valve.

      Tech Tips

      Arrange the removed parts in the correct order.

  3. REMOVE VALVE STEM OIL SEAL

    1. Using needle-nose pliers, remove the oil seals.

      A011TQ4

  4. REMOVE VALVE SPRING SEAT

    1. Using compressed air and a Magnet Hand, remove the valve spring seat by blowing air onto it.

      A011STG

  5. REMOVE NO. 1 STRAIGHT SCREW PLUG

    Note

    If water leaks from the No. 1 screw plug or the plug is corroded, replace it.

    A011TZ8

    1. Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.

  6. REMOVE NO. 2 STRAIGHT SCREW PLUG

    Note

    If water leaks from the No. 2 screw plug or the plug is corroded, replace it.

    A011RBZ

    1. Using a 14 mm hexagon wrench, remove the screw plug and gasket.

  7. REMOVE STUD BOLT

    Note

    If a stud bolt is deformed or its threads are damaged, replace it.