REAR CRANKSHAFT OIL SEAL REMOVAL

  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    1. Using SST, hold the crankshaft pulley.

      A011UYYE04
      SST
      09213-54015
      09330-00021
      91551-80650

    2. Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly, and rear drive plate spacer.

      A011T88

  3. REMOVE REAR ENGINE OIL SEAL

    1. Using a knife, cut off the lip of the oil seal.

      A011T7DE07
      Text in Illustration
      *a Cut Position

    2. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or the crankshaft.