FRONT CRANKSHAFT OIL SEAL REMOVAL

  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT

    1. Attach a wrench to the hexagonal portion of the belt tensioner as shown in the illustration, rotate the belt tensioner clockwise, and remove the V-ribbed belt.

      A011RSL

  6. REMOVE CRANKSHAFT PULLEY

    1. Using SST, hold the crankshaft pulley and loosen the pulley bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.

      A011TDVE01
      Text in Illustration
      *a Hold
      *b Turn
      SST
      09213-54015
      09330-00021
      91551-80650

    2. Using SST and the pulley bolt, remove the crankshaft pulley.

      A011UAJE02
      Text in Illustration
      *1 Pulley Bolt
      *a Hold
      *b Turn
      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )

      Tech Tips

      Apply a lubricant to the threads and end of SST.

  7. REMOVE TIMING CHAIN COVER OIL SEAL

    1. Using a screwdriver, pry out the oil seal.

      A011TZU

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or the crankshaft.