IGNITION COIL AND SPARK PLUG INSTALLATION

Tech Tips

Perform "Inspection After Repair" after replacing the spark plug and ignition coil assembly Click here.

  1. INSTALL SPARK PLUG

    1. Install the 6 spark plugs.

      A011S1B
      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repair" after replacing the spark plug Click here.

  2. INSTALL IGNITION COIL ASSEMBLY

    1. Install the 6 ignition coils with the 6 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repair" after replacing the ignition coil assembly Click here.

    2. Connect the 6 ignition coil connectors.

    3. Connect the 2 wire harness clamps.

    4. Install the nut.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL NO. 1 SURGE TANK STAY

    Note

    Do not apply oil to the bolt as listed below:

    Oil Application Prohibited Bolt
    Bolt for No. 1 surge tank stay and cylinder head cover

    1. Install the No. 1 surge tank stay with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

    Click here.