INTEGRATION RELAY INSPECTION

  1. INSPECT NO. 1 INTEGRATION RELAY

    A011SD6E04
    Text in Illustration
    *1 No. 1 Integration Relay - -

    1. EFI MAIN RELAY:

      1. Measure the resistance according to the value(s) in the table below.

        A011QSDE01
        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 Battery voltage is not applied between terminals 1C-7 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 Battery voltage is applied between terminals 1C-7 and 1E-2 Below 1 Ω
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-3
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-4
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-6
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-9
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-10
        Text in Illustration
        *1 No. 1 Integration Relay

        If the resistance is not as specified, replace the No. 1 integration relay.

    2. A/F HTR RELAY:

      1. Measure the resistance according to the value(s) in the table below.

        A011QSDE01
        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 Battery voltage is not applied between terminals 1A-8 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 Battery voltage is applied between terminals 1A-8 and 1E-2 Below 1 Ω
        No. 1 integration relay 1A-7 - No. 1 integration relay 1D-1
        Text in Illustration
        *1 No. 1 Integration Relay

        If the resistance is not as specified, replace the No. 1 integration relay.

    3. IG2 RELAY:

      1. Measure the resistance according to the value(s) in the table below.

        A011QSDE01
        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 Battery voltage is not applied between terminals 1C-8 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 Battery voltage is applied between terminals 1C-8 and 1E-2 Below 1 Ω
        No. 1 integration relay 1A-2 - No. 1 integration relay 1D-3
        No. 1 integration relay 1A-3 - No. 1 integration relay 1D-3
        No. 1 integration relay 1A-5 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-1 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-2 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-5 - No. 1 integration relay 1D-3
        Text in Illustration
        *1 No. 1 Integration Relay

        If the resistance is not as specified, replace the No. 1 integration relay.