HEATED OXYGEN SENSOR INSTALLATION

  1. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

    1. Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.

      A011UTCE01
      Text in Illustration
      *a

      Fulcrum Length

      30 mm (1.18 in.)
      *b

      Fulcrum Length

      180 mm (7.09 in.)
      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 33 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

  2. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

    1. Using SST, install the heated oxygen sensor to the center exhaust pipe assembly.

      A011QQ2E01
      Text in Illustration
      *a

      Fulcrum Length

      30 mm (1.18 in.)
      *b

      Fulcrum Length

      180 mm (7.09 in.)
      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 33 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

  3. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here.