IGNITION COIL AND SPARK PLUG REMOVAL

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    1. Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.

      A011TUX

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY

    1. Disconnect the 4 ignition coil assembly connectors.

    2. Remove the 4 bolts and 4 ignition coil assemblies.

      A011T0I

  3. REMOVE SPARK PLUG

    1. Using a spark plug wrench, remove the 4 spark plugs.

      A011SXT