CAMSHAFT OIL CONTROL VALVE REMOVAL

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    1. Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.

      A011TUX

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. SEPARATE ENGINE WIRE

    1. Remove the 2 nuts and separate the engine wire.

      A011TJ0

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

    1. Camshaft timing oil control valve assembly (for exhaust side)

      1. Disconnect the oil control valve connector.

        A011QLH

      2. Remove the bolt and oil control valve.

      3. Remove the O-ring from the oil control valve.

        A011UWWE06
        Text in Illustration
        *1 O-ring

    2. Camshaft timing oil control valve assembly (for intake side)

      1. Disconnect the oil control valve connector.

        A011SAT

      2. Remove the bolt and oil control valve.

      3. Remove the O-ring from the oil control valve.

        A011UWWE06
        Text in Illustration
        *1 O-ring