ACCELERATOR PEDAL INSTALLATION

  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note

    • Avoid physical shock to the accelerator pedal assembly.

    • Do not disassemble the accelerator pedal assembly.

    • This accelerator pedal does not require lubrication.

    • Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    1. Temporarily install the accelerator pedal sensor assembly with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      A011RZTE03
      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the accelerator pedal connector.