Click here

ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ (для расширительного топливного бачка) ПРОВЕРКА

Click here
Click here
  1. Click here

    INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 3 Float level is F (upper) 12 to 18 Ω
      Float level is E (lower) 405 to 415 Ω
      Table 1. Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge)
      *b F (Upper)
      *c E (Lower)

      If the result is not as specified, replace the fuel sender gauge assembly.