ТОПЛИВНЫЙ НАСОС ПОВТОРНАЯ СБОРКА

INSTALL NO. 1 FUEL SUCTION SUPPORT

1. Attach the 2 claws to the claw holes to install the fuel suction support.

INSTALL FUEL MAIN VALVE ASSEMBLY

1. 

   Text in Illustration

   *1	New O-Ring

   Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

2. Install the fuel main valve to the fuel filter case.

   Note

   Make sure the O-rings are not cut or pinched during the installation.

INSTALL FUEL PUMP

1. Connect the fuel pump wire harness connector to the fuel pump.

2. 

   Text in Illustration

   *1	O-Ring
   *2	Spacer

   Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

3. Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.

INSTALL NO. 1 FUEL SUB-TANK

Text in Illustration

*1

Fuel Tube

Note

Make sure that the fuel tube passes into the section marked by the circle.

1. Attach the 3 claws to the claw holes and install the fuel sub-tank.

2. 

   Text in Illustration

   *1

   Jet Pump

   Connect the jet pump (labeled B) to the sub-tank.

   
   

   1. Attach the claw on the end of the tube to the claw hole.

3. Connect the jet pump (labeled A) to the sub-tank.

4. Connect the fuel pump connector.