ТОПЛИВНЫЙ НАСОС РАЗБОРКА

Note

Do not disconnect the hoses indicated in the illustration.

A015DPH

  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01582N

      Disconnect the fuel sender gauge connector.

    2. A0158XWE02
      Text in Illustration
      *a Slide

      Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.

  2. REMOVE NO. 1 FUEL SUB-TANK


    1. A0155NT

      Disconnect the fuel pump connector.

    2. A015877E02

      Disconnect the jet pump (labeled A) from the sub-tank.

    3. Disconnect the jet pump (labeled B) from the sub-tank.

      Text in Illustration
      *1 Jet Pump

      1. Using a small screwdriver, detach the claw from the sub-tank.

        Tech Tips

        Tape the screwdriver tip before use.

    4. A0158V4

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A015900

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note

      Do not damage the fuel sub-tank.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FUEL PUMP


    1. A015C78E02
      Text in Illustration
      *1 Fuel Filter Case

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A015CWE

      Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01588GE02
      Text in Illustration
      *1 O-Ring
      *2 Spacer

      Remove the O-ring and spacer from the fuel pump.

  4. REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A015CNOE02
      Text in Illustration
      *1 Fuel Filter Case
      *2 O-Ring

      Remove the fuel main valve from the fuel filter case.

    2. Remove the 2 O-rings from the fuel main valve.

  5. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A0155Y1

      Detach the 2 claws from the claw holes to remove the fuel suction support.