РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ СНЯТИЕ


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A015DFWE03
      Обозначения на рисунке
      *1 Кронштейн
      *2 Крепежный крюк
      *3 Штифт
      *4 Уплотнительная шайба

      Поднимите переднюю часть декоративной крышки V-образного двигателя, чтобы открепить 3 штифта. Затем снимите 2 крюка декоративной крышки V-образного двигателя с кронштейна, чтобы снять декоративную крышку V-образного двигателя.

  5. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A0155X9

      Отсоедините вакуумный шланг и шланг вентиляции картера № 2.

    2. Ослабьте 2 хомута шланга.

    3. Снимите шланг воздушного фильтра.

  6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A015B4H

      Disconnect the No. 2 fuel tube from the pressure regulator Click here.

      CAUTION:

      Put a cloth or equivalent under the pressure regulator.

    2. A015CIU

      Disconnect the vacuum sensing hose from the pressure regulator.

    3. A0159Z7

      Remove the 2 bolts, and pull out the pressure regulator.

    4. Remove the O-ring from the pressure regulator.