ТОПЛИВНАЯ ФОРСУНКА СНЯТИЕ


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A015DFWE03
      Обозначения на рисунке
      *1 Кронштейн
      *2 Крепежный крюк
      *3 Штифт
      *4 Уплотнительная шайба

      Поднимите переднюю часть декоративной крышки V-образного двигателя, чтобы открепить 3 штифта. Затем снимите 2 крюка декоративной крышки V-образного двигателя с кронштейна, чтобы снять декоративную крышку V-образного двигателя.

  5. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A0155X9

      Отсоедините вакуумный шланг и шланг вентиляции картера № 2.

    2. Ослабьте 2 хомута шланга.

    3. Снимите шланг воздушного фильтра.

  6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A015C02

      Remove the No. 1 engine cover sub-assembly.

  7. REMOVE NO. 3 ENGINE COVER


    1. A01555P

      Remove the No. 3 engine cover.

  8. DISCONNECT NO. 2 FUEL TUBE


    1. A015AWQ

      Disconnect the No. 2 fuel tube from the fuel pressure regulator Click here.

  9. DISCONNECT NO. 1 FUEL TUBE


    1. A015912E01
      Text in Illustration
      *A RH Side

      Disconnect the No. 1 fuel tube from the fuel delivery pipe RH (for metallic type) Click here.

      SST
      09268-21011
    2. A0155I1E03
      Text in Illustration
      *A LH Side

      LH Side:

      Disconnect the No. 1 fuel tube from the fuel delivery pipe LH Click here.

  10. DISCONNECT NO. 1 FUEL HOSE


    1. A015BZJ

      Disconnect the No. 1 fuel hose from the fuel delivery pipe LH Click here.

  11. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH


    1. A015DKK

      Disconnect the ventilation hose and No. 6 wire harness connector.

    2. A015CD8

      Remove the 2 bolts and fuel delivery pipe RH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.

  12. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH


    1. Disconnect the No. 7 wire harness connector.

    2. A0159TJ

      Remove the 2 bolts and fuel delivery pipe LH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.

  13. REMOVE FUEL INJECTOR ASSEMBLY


    1. A0156TU

      Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.

      Note

      A0157I0E06

      For reinstallation, attach a tag or label to the injector shaft.

    2. A015BLJE06
      Text in Illustration
      *1 O-Ring

      Remove the O-ring from the fuel injector.

    3. A015BKLE03
      Text in Illustration
      *A Fuel Delivery Pipe RH

      Detach the 3 clamps and then remove the No. 6 wire harness from the delivery pipe RH.

    4. A01584ME02
      Text in Illustration
      *A Fuel Delivery Pipe LH

      Detach the 3 clamps and then remove the No. 7 wire harness from the delivery pipe LH.