ПЕДАЛЬ АКСЕЛЕРАТОРА УСТАНОВКА


  1. INSTALL ACCELERATOR PEDAL ASSEMBLY

    Note


    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal assembly.

      If applied, the accelerator pedal assembly must be replaced.

    • Avoid physical shocks to the accelerator pedal assembly.

    • Do not disassemble the accelerator pedal assembly.


    1. Install the accelerator pedal assembly with the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal position sensor connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A015B20

    1. Подсоедините разъемы.

    2. Установите нижнюю крышку панели приборов № 1 и закрепите ее 3 захватами.

    3. Заверните 2 винта.