ПЕДАЛЬ АКСЕЛЕРАТОРА СНЯТИЕ


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A0159IW

    1. Выверните 2 винта.

    2. Освободите 3 захвата.

    3. Отсоедините разъемы и снимите нижнюю крышку панели приборов № 1.

  2. REMOVE ACCELERATOR PEDAL ASSEMBLY

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal assembly.

    If applied, the accelerator pedal assembly must be replaced.


    1. A0155Z4E01

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 nuts and accelerator pedal assembly.