ПОДОГРЕВАЕМЫЙ КИСЛОРОДНЫЙ ДАТЧИК ПРОВЕРКА


  1. INSPECT HEATED OXYGEN SENSOR


    1. A0159DVE03
      Text in Illustration
      *A for Bank 1
      *B for Bank 2
      *a

      Component without harness connected

      (Heated Oxygen Sensor)

      Measure the heater resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      1 (HT1B) - 2 (+B)

      (for Bank 1)

      		 20°C (68°F) 11 to 16 Ω

      1 (HT2B) - 2 (+B)

      (for Bank 2)

      If the result is not as specified, replace the sensor.