ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ УСТАНОВКА

INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
1. Temporarily install the sensor to the exhaust pipe by hand.
2. Text in Illustration
  
  *1 Fulcrum Length
  
  Using SST, tighten the sensor.
  
  SST
  
  09224-00010
  
  Torque:
  
  without SST
  
  44 N*m { 449 kgf*cm, 32 ft.*lbf }
  
  with SST
  
  40 N*m { 408 kgf*cm, 30 ft.*lbf }
  Tech Tips
  
  Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). If using a torque wrench with a length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.
  
  Make sure SST and the wrench are connected in a straight line.
INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
1. Temporarily install the sensor to the exhaust pipe by hand.
2. Text in Illustration
  
  *1 Fulcrum Length
  
  Using SST, tighten the sensor.
  
  SST
  
  09224-00010
  
  Torque:
  
  without SST
  
  44 N*m { 449 kgf*cm, 32 ft.*lbf }
  
  with SST
  
  40 N*m { 408 kgf*cm, 30 ft.*lbf }
  Tech Tips
  - Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). If using a torque wrench with a length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.
  - Make sure SST and the wrench are connected in a straight line.
INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY

Click here