ДАТЧИК ДЕТОНАЦИИ УСТАНОВКА


  1. INSTALL KNOCK SENSOR

    A01584AE01
    Text in Illustration
    *A for Bank 2 Sensor 1
    *B for Bank 1 Sensor 1
    *C for Bank 2 Sensor 2
    *D for Bank 1 Sensor 2
    A015CC1 Front
    A0158FK Upper Side
    A015719 Rear

    1. Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.

    2. Connect the 4 sensor connectors.

  2. INSTALL NO. 1 ENGINE COVER

  3. INSTALL NO. 2 ENGINE COVER

  4. INSTALL INTAKE MANIFOLD

    Click here