КОНТАКТНЫЙ ДАТЧИК ДАВЛЕНИЯ МАСЛА УСИЛИТЕЛЯ РУЛЕВОГО УПРАВЛЕНИЯ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ


  1. INSPECT POWER STEERING OIL PRESSURE SWITCH


    1. Check the oil pressure switch.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester main switch on.

      4. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Power Steering pressure.

      5. Start the engine.

      6. Read the value displayed on the intelligent tester.

        OK
        Condition Specified Condition
        Power steering operating ON
        Power steering not operating OFF

        If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.