Click here

BACK DOOR GARNISH (for Double Swing Out Type) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE SYMBOL EMBLEM

    Tip:

    When removing the symbol emblem, heat the vehicle body and symbol emblem using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Symbol Emblem 20 to 30°C (68 to 86°F)
    Note:

    Do not heat the vehicle body or symbol emblem excessively.


    1. A0156KXE01

      Put protective tape around the symbol emblem.

    2. Insert piano wire between the vehicle body and symbol emblem.

      Tip:

      Be careful of the boss positions.

    3. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the symbol emblem.

      Table 1. Text in Illustration
      *1 Protective Tape
      *2 Wooden Block
      *3 Boss
  2. Click here

    REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR


    1. A015E11

      Remove the back door outside garnish protector.

  3. Click here

    REMOVE BACK DOOR OUTSIDE GARNISH


    1. A0157AI

      Remove the 3 screws and back door outside garnish from the back door No. 2 outside garnish.

  4. Click here

    REMOVE REAR LICENSE LIGHT COVER


    1. A015DIA

      Detach the 9 claws and remove the rear license light cover from the back door outside garnish.

  5. Click here

    REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A015D5T

      Remove the 2 screws.

    2. Detach the 2 guides and remove the 2 license plate light assemblies.