BACK DOOR GARNISH (for Double Swing Out Type) REMOVAL


  1. REMOVE ASSIST GRIP LH


    1. A015B0FE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the 2 covers.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A015CSH

      Remove the 2 bolts and assist grip.

  2. REMOVE DOOR INSIDE HANDLE BEZEL LH


    1. A0155G8

      Detach the claw and open the cover.

    2. A0159QT

      Remove the screw.

    3. A015DSLE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    4. Detach the guide and remove the door inside handle bezel in the direction indicated by the arrow in the illustration.

  3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH


    1. A015DEK

      Detach the 10 clips and remove the back door trim panel.

  4. REMOVE REAR ASSIST GRIP REINFORCEMENT LH


    1. A0159N7

      Remove the 3 bolts and rear assist grip reinforcement.

  5. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY LH


    1. A0159PH

      Remove the screw.

    2. Detach the guide and remove the back door inside handle in the direction indicated by the arrow in the illustration.

    3. Disconnect the 2 links from the back door inside handle.

  6. REMOVE BACK DOOR SERVICE HOLE COVER LH


    1. A0155RQ

      Disconnect the 2 connectors and detach the 3 clamps.

    2. A015ALP

      Pull out the 2 links and wire harness from the back door service hole cover, and then remove the back door service hole cover.

      Tech Tips

      Remove any remaining butyl tape from the back door panel.

  7. REMOVE BACK DOOR OUTSIDE HANDLE


    1. A01592T

      Detach the guide and disconnect the cable.

    2. A0156CV

      Remove the 2 bolts and back door outside handle.

  8. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A015DJBE01

      Detach the clamp and disconnect the connector.

    2. Detach the grommet, and then pull out the wire harness from the back door panel.

      Text in Illustration
      *1 Grommet
    3. A0156GA

      Detach the 10 clips and remove the back door outside garnish.