FRONT DOOR OUTSIDE MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH


    1. A01562HE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front door outside moulding sub-assembly LH.

    2. A0157ZK

      Using a moulding remover, detach the 3 clamps and 11 clips, and remove the front door outside moulding sub-assembly LH.

    3. Remove any clips remaining on the door panel.

      Note

      Be careful not to allow any clips or pieces of clips to fall inside the door panel.