Click here

REAR BUMPER (w/ Towing Hitch) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Disconnect the 4 connectors.

    2. A0155O2

      Detach the 12 clamps and remove the No. 2 frame wire.

  2. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)


    1. A01556X

      Detach the 2 claws and remove the No. 1 ultrasonic sensor.

      Tip:

      • Use the same procedure for all No. 1 ultrasonic sensors.

      • The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.

  3. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    1. A0155PT

      Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

      Tip:

      • Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.

      • The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

  4. Click here

    REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    1. A0158HP

      Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

      Tip:

      Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.

  5. Click here

    REMOVE REAR BUMPER ENERGY ABSORBER


    1. A0158EW

      Detach the 8 claws and remove the rear bumper energy absorber.

  6. Click here

    REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A015DMZ

      Remove the 2 nuts.

    2. Detach the claw and remove the reflex reflector assembly LH.

  7. Click here

    REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  8. Click here

    REMOVE REAR LOWER BUMPER COVER


    1. Remove the clip and rear lower bumper cover.

  9. Click here

    REMOVE REAR NO. 2 STEP COVER


    1. A015DBA

      Remove the 2 screws and 2 clips.

    2. Detach the 4 claws and remove the rear No. 2 step cover.