Click here

LOW PITCHED HORN INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT LOW PITCHED HORN ASSEMBLY (for Spiral Type)


    1. Apply battery voltage and check operation of the horn, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the horn.

  2. Click here

    INSPECT LOW PITCHED HORN ASSEMBLY (for Standard)


    1. Apply battery voltage and check operation of the horn, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the horn.