TURN SIGNAL FLASHER ASSEMBLY (for LHD) ON-VEHICLE INSPECTION


  1. INSPECT TURN SIGNAL FLASHER ASSEMBLY


    1. A015BAAE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      E19-7 (E) - Body ground Always Below 1 Ω

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      E19-1 (IG) - E19-7 (E) Engine switch on (IG) 11 to 14 V
      E19-2 (LR) - E19-7 (E) Hazard warning switch off Below 1 V
      Hazard warning switch on 11 to 14 V
      E19-3 (LL) - E19-7 (E) Hazard warning switch off Below 1 V
      Hazard warning switch on 11 to 14 V
      E19-4 (B) - E19-7 (E) Always 11 to 14 V
      E19-5 (EL) - E19-7 (E) Headlight dimmer switch (TURN L) off 9 V or higher
      Headlight dimmer switch (TURN L) on Below 1 V
      E19-6 (ER) - E19-7 (E) Headlight dimmer switch (TURN R) off 9 V or higher
      Headlight dimmer switch (TURN R) on Below 1 V
      E19-8 (HAZ) - E19-7 (E) Hazard warning switch off 9 V or higher
      Hazard warning switch on Below 1 V

      If the result is not as specified, there may be a malfunction in the turn signal flasher.