Click here

FRONT BUMPER (w/ Winch) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE NO. 4 ENGINE ROOM WIRE (w/ Fog Light)


    1. Disconnect the 2 connectors.

    2. A015C8J

      Detach the 11 clamps and remove the No. 4 engine room wire.

  2. Click here

    REMOVE FRONT BUMPER INNER BRACKET (w/ Fog Light)


    1. A0157G8

      Detach the 3 claws and remove the front bumper inner bracket.

  3. Click here

    REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. A015B6C

      Remove the 2 screws.

      Table 1. Text in Illustration
      A015DIT Screw
      A015CC1 Connector

    2. Detach the 2 guides and remove the fog light assembly LH.

    3. Disconnect the connector.

  4. Click here

    REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tip:

    Use the same procedure described for the LH side.

  5. Click here

    REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)


    1. A015A6Q

      Remove the 2 retainers and the 2 screws.

    2. A0157WQ

      Detach the 5 claws and remove the front bumper hole cover LH.

  6. Click here

    REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)

    Tip:

    Use the same procedure described for the LH side.

  7. Click here

    REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. A015C3L

      Remove the 2 retainers and the screw.

    2. A015AIF

      Detach the 5 claws and remove the front bumper hole cover LH.

  8. Click here

    REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tip:

    Use the same procedure described for the LH side.

  9. Click here

    REMOVE LOWER RADIATOR GRILLE LH


    1. A0159JD

      Detach the 6 claws and remove the lower radiator grille LH.

  10. Click here

    REMOVE LOWER RADIATOR GRILLE RH

    Tip:

    Use the same procedure described for the LH side.

  11. Click here

    REMOVE FRONT NO. 2 BUMPER PROTECTOR


    1. A0158RY

      Remove the 2 front No. 2 bumper protectors.

  12. Click here

    REMOVE FRONT LICENSE PLATE BRACKET (w/ Bracket)


    1. A015E3Z

      Remove the 2 nuts and front license plate bracket.

  13. Click here

    REMOVE WINCH CONTROL WIRE


    1. A015AQC

      Remove the 2 nuts and winch control wire.