SIDE TURN SIGNAL LIGHT ASSEMBLY (for Outer Rear View Mirror) INSTALLATION

INSTALL OUTER MIRROR COVER LH

1. Install the outer mirror cover.

   
   
   1. 

      Insert the rib on the outer edge of the cover into the groove of the mirror body.

      Note:

      Do not scratch the turn light.

      Table 1. Text in Illustration

      *1

      Rib

   2. 

      While making sure that the rib of the cover fits properly into the groove of the mirror body, squeeze the inner end of the cover and the mirror body together to attach the inner claws.

2. 

   Push on the cover at the locations of the 8 claws to confirm that the claws are attached properly.

3. Check that there is no gap between the cover and mirror body.

   Tip:

   If there is a gap between the cover and body, noise will occur during driving.

INSTALL OUTER MIRROR LH

1. Install the outer mirror cover.

   
   
   1. 

      Insert the rib on the outer edge of the cover into the groove of the mirror body.

      Note:

      Do not scratch the turn light.

      Table 2. Text in Illustration

      *1

      Rib

   2. 

      While making sure that the rib of the cover fits properly into the groove of the mirror body, squeeze the inner end of the cover and the mirror body together to attach the inner claws.

2. 

   Push on the cover at the locations of the 8 claws to confirm that the claws are attached properly.

3. Check that there is no gap between the cover and mirror body.

   Tip:

   If there is a gap between the cover and body, noise will occur during driving.