HEADLIGHT ASSEMBLY (for Halogen Headlight) REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)


    1. A0156I9E01

      Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.

    2. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.

    3. Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.

    4. Connect the connector.

  2. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)


    1. A01579P

      Install the front turn signal light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  3. INSTALL NO. 1 HEADLIGHT BULB (w/ Projector Headlight)


    1. A015DYP

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 1 headlight bulb.

      Note

      Do not touch the glass part of the No. 1 headlight bulb glass.

    2. Connect the connector.

  4. INSTALL NO. 2 HEADLIGHT BULB (w/ Projector Headlight)


    1. A015DK2

      Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb glass.

    2. Connect the connector.

  5. INSTALL HEADLIGHT GASKET (w/ Projector Headlight)


    1. Install a new headlight gasket to the No. 1 headlight cover.

  6. INSTALL NO. 1 HEADLIGHT COVER (w/ Projector Headlight)


    1. A0155BE

      Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration to install the No. 1 headlight cover to the headlight unit LH.

  7. INSTALL HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)


    1. A015CSWE01

      Insert the headlight leveling motor LH in the direction indicated by the arrow (1) in the illustration.

    2. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to connect the shaft.

    3. Turn the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to install it.

  8. INSTALL CLEARANCE LIGHT BULB (w/o Projector Headlight)


    1. A0157TM

      Install the clearance light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  9. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)


    1. A0159JU

      Install the front turn signal light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  10. INSTALL NO. 2 HEADLIGHT BULB (w/o Projector Headlight)


    1. A0157XU

      Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb glass.

  11. INSTALL NO. 1 HEADLIGHT BULB (w/o Projector Headlight)


    1. A01557G

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to install the No. 1 headlight bulb.

      Note

      Do not touch the glass part of the No. 1 headlight bulb glass.