HEADLIGHT ASSEMBLY (for Halogen Headlight) DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE NO. 1 HEADLIGHT COVER (w/ Projector Headlight)


    1. A0159QN

      Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration and remove the No. 1 headlight cover.

  2. REMOVE HEADLIGHT GASKET (w/ Projector Headlight)


    1. Remove the headlight gasket from the No. 1 headlight cover.

  3. REMOVE NO. 2 HEADLIGHT BULB (w/ Projector Headlight)


    1. A0156BO

      Disconnect the connector.

    2. Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb.

  4. REMOVE NO. 1 HEADLIGHT BULB (w/ Projector Headlight)


    1. A0158M5

      Disconnect the connector.

    2. Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

      Note

      Do not touch the No. 1 headlight bulb glass.

  5. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)


    1. A0159ZH

      Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the front turn signal light bulb from the socket.

  6. REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)


    1. A015DKWE01

      Disconnect the connector.

    2. Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

    3. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

    4. Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.

  7. REMOVE NO. 1 HEADLIGHT BULB (w/o Projector Headlight)


    1. A01575C

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

      Note

      Do not touch the glass part of the No. 1 headlight bulb.

  8. REMOVE NO. 2 HEADLIGHT BULB (w/o Projector Headlight)


    1. A015E84

      Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

      Note

      Do not touch the glass part of the No. 2 headlight bulb.

  9. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)


    1. A015C81

      Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the front turn signal light bulb from the socket.

  10. REMOVE CLEARANCE LIGHT BULB (w/o Projector Headlight)


    1. A015DY8

      Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the clearance light bulb from the socket.

  11. REMOVE HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)


    1. A015CUAE01

      Disconnect the connector.

    2. Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

    3. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

    4. Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.