HEADLIGHT CLEANER MOTOR REMOVAL


  1. REMOVE FRONT FENDER MUDGUARD LH

    A015BXI

    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 4 screws and mudguard.

  2. REMOVE SIDE STEP ASSEMBLY LH


    1. Remove the 6 bolts and side step.

      A0157CD

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Remove the 8 side mudguard retainers and screw.

    2. Detach the 10 clips and remove the rocker panel moulding.

      A015CORE01

  4. REMOVE FRONT FENDER LINER LH


    1. Remove the 2 screws.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Using a clip remover, remove the 2 grommets, 12 clips and fender liner.

      A0155JN

  5. DRAIN WASHER FLUID


    1. A015BWY

      Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.

  6. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01562S

      Using a clip remover, remove the clip and washer inlet.

  7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. A015E4YE02

      Detach the clamp.

    2. Disconnect the 2 connectors.

    3. Disconnect the headlight cleaner hose.

    4. A015CV4

      Remove the 4 bolts. Then remove the windshield washer jar and pump.

  8. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Disconnect the connector.

    2. A015CIT

      Remove the headlight cleaner motor and pump assembly together with the gasket in the direction shown in the illustration.